Usages:
The pumps are suitable to transfer liquids containing impurities measuring up to 2-3 mm.The hydraulic components, namely the impeller, scroll and pump body in PBT allow the pumps to be used with water, emulsions and oily substances in general with a maximum viscosity of 3 Engler (21 CST).
The temperature of the liquid must not exceed 70 C.
They are usually used on:·
Machine tools (milling machines – lathes - drills)
Glass processing machines (TRI version)
Printing machines (axis in AISI 420-316
– PBT on depth of immersion 270 mm.)
Air-conditioning systems
Filtration systems
They should usually be installed on a tank, with a capacity in proportion to the flow rate, at about 3 – 4 cm. from the bottom. It is important to check that the maximum level of the liquid in the tank always remains 3– 4 cm. lower than the flange (see figure). In cases where the liquid is particularly dirty, the user is recommended to construct the tank in compartments to allow the dirt to deposit before it is stirred up by the pump.
For other usages you are advised to consult our technical office
Download PDF catalog
Immersion Pump type SPV
| Components | SP | available on request |
| Pump body | Valox PBT | - |
| Pumpendeckel | Valox PBT |
- |
| Impeller |
Valox PBT | - |
| Shaft | Stahl C40 | AISI 420 |
| type | kW | H = Total head in metres of column of water | |||||||||||||
| in. | nom. | 0 | 0,5 | 1 | 1,5 | 2 | 2,5 | 3 | 3,5 | 4 | 4,5 | 5 | 5,5 | 6 | |
| P1 | P2 | Q = Delivery l/min | |||||||||||||
| SPV 12 | 0,15 | 0,07 | 56 | 52 | 48 | 43 | 38 | 33 | 27 | 21 | 13 | 6 | |||
| SPV 18 | 0,17 | 0,09 | 65 | 61 | 57 | 53 | 48 | 43 | 38 | 32 | 26 | 19 | 12 | 2 | |
| SPV 25 | 0,26 | 0,18 | 72 | 68 | 65 | 62 | 57 | 53 | 49 | 43 | 37 | 31 | 23 | 12 | |
| SPV 33 | 0,36 | 0,25 | 75 | 72 | 68 | 65 | 61 | 56 | 52 | 46 | 41 | 35 | 27 | 18 | 7 |
| type | kW | H = Total head in metres of column of water | |||||||||||||
| in. | nom. | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 12 | 13 | |
| P1 | P2 | Q = Delivery l/min | |||||||||||||
| SPV 50 | 1 | 0,75 | 263 | 250 | 238 | 226 | 213 | 198 | 182 | 164 | 147 | 127 | 103 | 43 | |
| SPV 75 | 1,2 | 0,9 | 275 | 264 | 252 | 240 | 226 | 213 | 198 | 182 | 165 | 146 | 125 | 75 | |
| SPV 100 | 1,01 | 0,75 | 280 | 269 | 258 | 246 | 233 | 220 | 206 | 192 | 176 | 159 | 139 | 89 | 15 |
| SPV 150 | 1,41 | 1,1 | 300 | 290 | 279 | 267 | 253 | 238 | 225 | 210 | 195 | 179 | 160 | 112 | 36 |
| type | Dimensions (mm) | weight | |||||||||
| A | B | C | Ø D | Ø E | Ø F | G | H | Ø I | Ø L | kg | |
| SPV 12 | 255 | 90 T | 165 | ¾" | 98 | 100 | 130 | 151 | 115 | 7 (n.4) |
2,8 |
| 285 | 120 T | 2,9 | |||||||||
| 335 | 170 T | 2,9 | |||||||||
| 385 | 220 T | 3 | |||||||||
| 435 | 270 T | 3,1 | |||||||||
| 515 | 350 | 3,3 | |||||||||
| SPV 18 | 255 | 90 T | 165 | ¾" | 98 | 100 | 130 | 151 | 115 | 7 (n.4) |
2,8 |
| 285 | 120 T | 2,9 | |||||||||
| 335 | 170 T | 3 | |||||||||
| 385 | 220 T | 3,1 | |||||||||
| 435 | 270 T | 3,2 | |||||||||
| 515 | 350 | 3,3 | |||||||||
| SPV 25 | 300 | 90 T | 210 | ¾" | 98 | 100 | 130 | 170 | 115 | 7 (n.4) |
4,3 |
| 330 | 120 T | 4,4 | |||||||||
| 380 | 170 T | 4,5 | |||||||||
| 430 | 220 T | 4,6 | |||||||||
| 480 | 270 T | 4,7 | |||||||||
| 560 | 350 | 4,8 | |||||||||
| SPV 33 | 300 | 90 T | 210 | ¾" | 98 | 100 | 130 | 170 | 115 | 7 (n.4) |
4,8 |
| 330 | 120T | 4,9 | |||||||||
| 380 | 170 T | 5 | |||||||||
| 430 | 220 T | 5,1 | |||||||||
| 480 | 270 T | 5,2 | |||||||||
| 560 | 350 | 5,3 | |||||||||
| SPV 50 | 460 | 200 T | 260 | 1¼" | 138 | 140 | 180 | 215 | 160 | 7 (n.4) |
7,7 |
| 530 | 270 T | 8,3 | |||||||||
| 610 | 350 | 8,9 | |||||||||
| SPV 75 | 460 | 200 T | 250 | 1¼" | 138 | 140 | 180 | 215 | 160 | 7 (n.4) |
8,7 |
| 530 | 270 T | 9,2 | |||||||||
| 610 | 350 | 9,9 | |||||||||
| SPV 100 | 500 | 200 T | 300 | 1¼" | 138 | 140 | 180 | 230 | 160 | 9 (n.4) |
10,5 |
| 570 | 270 T | 11 | |||||||||
| 650 | 350 | 11,7 | |||||||||
| SPV 150 | 500 | 200 T | 300 | 1¼" | 138 | 140 | 180 | 230 | 160 | 9 (n.4) |
11,8 |
| 570 | 270 T | 12,3 | |||||||||
| 650 | 350 | 13 | |||||||||
Subject to change!
Die Firma Linn-Pumpen GmbH übernimmt keine Haftung für Folgeschäden, welche aus evtl. fehlerhaften Informationen resultieren.